Flat Preloader Icon
Log in

Tag: #patient #specialist #limits #ability

Popular Articles

Popular Products

Popular Group Posts

Faiz MT avatar
Faiz MTDaily Dentistry
3 weeks ago
# Long-Lasting Restorations for Buccal and Cervical Caries: Expert Insights**

Buccal and cervical caries, especially when wide and deep, present a significant challenge in restorative dentistry. A common concern among dental practitioners is finding a restoration material that ensures longevity and reliability in these difficult-to-reach areas.

## Key Factors and Solutions for Durable Restorations

1. **Rubber Dam Isolation:**
Using a rubber dam during restorative procedures is crucial to prevent contamination from crevicular fluid. Contamination can significantly compromise the bonding process, leading to restoration failure. Studies have shown that the use of a rubber dam enhances the longevity of restorations by reducing contamination and providing a dry field, which is critical for bonding success .

2. **Material Compression and Failure:**
Compression factors can also contribute to the failure of restorations. High flow composites are suggested as an alternative to GIC in such cases. High flow composites have better adaptability to the cavity walls and can withstand occlusal forces better, reducing the likelihood of failure .

3. **Moisture Control:**
When a rubber dam is not used, ensuring that the cavity is dry using cotton rolls is essential. Excess moisture can interfere with the bonding process, leading to premature failure. The bonding agent should be carefully applied, with sufficient rubbing to form proper resin tags, ensuring better adhesion .

4. **Proper Etching and Dentin Management:**
Over-drying after etching can cause the dentin tubules to collapse, leading to inadequate bonding. Maintaining slight moisture after etching is recommended to preserve the collagen network in the dentin, allowing better bonding .

5. **Optimizing GIC Use:**
For those preferring GIC, using a medium consistency, which is neither too fluid nor too stiff, can provide better results. Additionally, applying a thin layer of GIC liquid on the tooth surface before placing the cement can improve adhesion. This technique, as endorsed by industry experts, has been observed to significantly enhance the performance of GIC in clinical practice .

In conclusion, the success of restorative procedures in cases of buccal and cervical caries depends on meticulous attention to isolation, moisture control, and the correct use of materials. Following these guidelines, supported by clinical experience and expert advice, can lead to more durable and reliable restorations.

---

### References:

1. **Rubber Dam Use in Dentistry**: "Effect of Rubber Dam on the Success of Direct Restorations: A Systematic Review," Journal of the American Dental Association, [link](https://jada.ada.org/).

2. **High Flow Composites**: "The Clinical Effectiveness of Resin Composites in Direct Restorations: A Systematic Review," International Journal of Dentistry, [link](https://www.hindawi.com/journals/ijd/).

3. **Moisture Control in Bonding**: "The Role of Moisture Control in Adhesive Dentistry," Journal of Dental Research, [link](https://journals.sagepub.com/home/jdr).

4. **Dentin Management**: "Etching in Adhesive Dentistry: Principles and Techniques," Operative Dentistry, [link](https://meridian.allenpress.com/operative-dentistry).

5. **GIC Optimization**: "Optimizing Glass Ionomer Cements for Improved Clinical Outcomes," Dental Materials, [link](https://www.sciencedirect.com/journal/dental-materials).

These references provide additional context and evidence-based support for the techniques discussed.

** **Disclaimer:**

This article was generated with the assistance of AI and should be used as a supplementary resource. While efforts have been made to ensure accuracy, it's essential to conduct your own research and consult authoritative sources before applying any of the information provided. This content is intended for informational purposes only and does not replace professional advice.
Register or Login to react or comment on this post.
Faiz MT avatar
Faiz MTDaily Dentistry uploaded 1 photo
1 month ago
On July 23, 1903, the Ford Motor Company sold its first car, the Model A, to a Chicago dentist named Dr. Ernst Pfenning for around $850. This event marked a significant milestone for Ford, launching the company into the automobile industry. The Model A was a two-cylinder vehicle with a tonneau or backseat, capable of reaching speeds of up to 30 miles per hour. It was manufactured at Ford’s Mack Avenue plant in Detroit and was notable for its powerful engine and simple controls [[❞]](https://transportationhistory.org/2021/07/23/1903-a-chicago-dentist-becomes-the-first-owner-of-the-trailblazing-ford-model-a/) [[❞]](https://bowienewsonline.com/2018/07/1903-ford-motor-company-takes-its-first-order/).

## Dentistry in the Early 1900s vs. Today

In the early 1900s, dentistry was a burgeoning field with significant advancements underway. Dentists of that era relied heavily on manual tools and rudimentary techniques compared to today's standards. Pain management was a significant challenge, with limited options like ether and nitrous oxide available for anesthesia. Sterilization techniques were also in their infancy, making infections a common risk.

Contrast this with modern dentistry, which has seen remarkable advancements. Today, dental procedures are performed with high precision using state-of-the-art technology such as digital X-rays, CAD/CAM systems for crowns and bridges, and laser treatments. Anesthesia and sedation techniques have greatly improved, making procedures more comfortable for patients. Furthermore, the focus on cosmetic dentistry has expanded, offering treatments like veneers, implants, and Invisalign to enhance dental aesthetics and function.

The evolution of dentistry from Dr. Pfenning's time to the present illustrates the profound advancements in both technology and patient care, reflecting the broader technological strides represented by the automotive industry's progress from the Model A to modern vehicles.

These historical insights underscore the importance of continuous innovation in all fields, including dentistry, ensuring better outcomes and enhanced experiences for patients [[❞]](https://transportationhistory.org/2021/07/23/1903-a-chicago-dentist-becomes-the-first-owner-of-the-trailblazing-ford-model-a/) [[❞]](https://bowienewsonline.com/2018/07/1903-ford-motor-company-takes-its-first-order/).
Register or Login to react or comment on this post.
KP Sana avatar
KP Sana Premium MemberDaily Dentistry
3 weeks ago
Daily Capsule

Here's another interesting fact about anesthesia in dentistry:

Did you know that the first local anesthetic used in dentistry was cocaine? In the late 19th century, cocaine was used as a topical anesthetic to numb the mucous membranes in the mouth. However, due to its high potential for addiction and abuse, it was eventually replaced by other safer alternatives like procaine (Novocain) and lidocaine.

But here's the fascinating part: the discovery of cocaine's anesthetic properties was accidental! In 1865, German chemist Albert Niemann isolated cocaine from coca leaves and experimented with it on his own tongue, discovering its numbing effects!

Today, modern dentistry uses a variety of safer, more effective local anesthetics, but it's interesting to note the origins of anesthesia in dentistry and how it has evolved over time!
Register or Login to react or comment on this post.
JINCY NAZAR avatar
JINCY NAZAR Top ContributorMarketplace uploaded 1 photo
1 month ago
FOR SALE: Unused(brand new) Simpladent India Basal Implant Kit

Kit Includes:
Starter Kit TW-2
Handgrip kit
DOS 1,2,3 Drills

Price: Negotiable

Location: TRIVANDRUM

Contact: +91 9447777010(calls / whatsapp)
Register or Login to react or comment on this post.

Latest Members